lahat ng kategorya

Balita at Blog

Tahanan>Balita at Blog

Kaalaman sa mga medikal na nonwoven na tela mula sa nonwoven fabric making machinery para sa mga produktong medikal

Oras: 2023-03-24 Mga Hit: 14

Non woven fabrics are widely used, such as in packaging, furniture, agricultural products, protective products, and medical and hygienic products. So is simple medical nonwoven fabric really simple in terms of medical treatment?

1.Brief Introduction to the Properties of Polypropylene SMS Nonwoven Fabric from SMS nonwoven fabric equipment
SMS nonwoven fabric (S-spunbond, or spunbond nonwoven fabric; M-Mehblown, or melt blown nonwoven fabric) is produced SMS nonwoven fabric equipment by combining two processes: spunbond and melt blown.This product combines the high strength of spunbond nonwoven fabrics with small differences in vertical and horizontal strength, as well as the high shielding and waterproof properties of meltblown non woven fabrics. Therefore, it has a certain degree of waterproof, isolation, and good breathability, and is not prone to fluff shedding.SMS is commonly used in medical polypropylene SMS nonwoven protective products, such as surgical clothing, protective clothing, pathogenic clothing, disinfection bags, isolation clothing, surgical hole towels, bed sheets, medical masks, shoe covers, etc.

The gap formed between the meltblown non woven equipment of SMS is quite small, which can partially block the infiltration of blood and bacteria, and also has a certain blocking effect on dust and bacteria.However, ordinary SMS cannot completely block alcohol, blood, and oils, and does not have antistatic properties.Therefore, medical protective products made directly from SMS do not yet have strong safety and security performance. Using an appropriate one step one bath process to treat SMS can enable the product to achieve higher alcohol resistance, and have antistatic properties while maintaining its hydrostatic resistance, greatly improving the safety of medical use.

2.Test standards
①.The alcohol resistance test adopts the AATCC-193 standard, with a maximum of 8 levels.
②.The water pressure resistance test adopts the ISO-811 standard, and the greater the value, the better the effect.
③.Anti static adopts AATCC-76 standard, the smaller the value, the better the effect.

3.Description of standards and basic parameters
SMS, SMMS,SSMMS and SMMMS are all composite nonwoven fabrics, which are spunbond and melt blown composite products. Fully using 100% safety polypropylene fiber as the raw material, it is a final sterilization packaging material for disposable medical supplies formed by a layer of bacteria barrier layer and two layers of tensile extension layer.Non toxic, no fiber shedding, high effective bacterial resistance rate; The fabric surface has good uniformity and fullness, and the product meets the requirements of YY/T 0698.2-2009 and EN 868-2. It has the characteristics of bacteria resistance, anti-static, tensile elongation, etc.

SMMS covers all the performance of SMS, and has greatly expanded in the performance of SMS: bacteria resistance, hydrostatic pressure, strength, uniformity, softness, and application fields.

SMMMS can replace pure cotton fabric with a soft, delicate feel and excellent skin affinity. The spunbonded layer is composed of continuous filaments with excellent breaking strength and elongation. The melt blown layer is composed of continuous ultrafine fibers, which has a good barrier effect against moisture, bacteria, dust, etc. It has high water pressure resistance, good air permeability, and good acid and alkali resistance.

Therefore, when selecting products made of medical nonwoven fabrics, it is not acceptable if the packaging is complete. We also need to select products with corresponding standards based on our own needs. From the masks we currently need every day, to the patient clothing for hospitalization, to the surgical clothing for doctors, to the nonwoven fabric for medical device packaging, and to the surgical cover sheet. "Any medical product that is labeled with no detailed production standards on its packaging or instructions can basically be determined to be a counterfeit or shoddy product, which not only does not provide protection, but may also cause harm to the human body.".

Ang Zhejiang Yanpeng Nonwoven Machinery Co., Ltd ay isang propesyonal na tagagawa ng nonwoven fabric production line na nakikibahagi sa pagbuo at produksyon sa loob ng maraming taon. Ang aming kumpanya ay nakatuon sa paggawa ng nonwoven production line mula noong 2008, Maaari kaming magbigay ng customized na solong S, SS, SSS spunbond nonwoven production line, SSMS, SMMS SMS spunmelt (spunbond & meltblown) na mga linya ng produksyon, at iba pang PP,PET/PLA Biodegradable non woven machine, BiCo spunbond production line sa aming mga customer.  
Ang mga tao ng Yanpeng ay patuloy na nakatuon sa pagbuo ng mga non-woven na kagamitan at mga kaugnay na produkto. Taos-puso kaming nais na ibalik ang aming mga customer ng mga produkto na matipid at pinakamahusay na serbisyo.  
Ang aming polypropylene(PP) spunbond nonwoven equipment ay patuloy na ina-update pagkatapos ng mga taon ng production practice, na ginagawang mas perpekto ang disenyo ng non-woven fabric production line at mas madali ang operasyon. Ang aming equipment ay patuloy na bumubuti. Ang aming mga kagamitan ay patuloy na nagpapabuti, sa ilalim ng premise ng kumpletong mga pagtutukoy, superyor na pagganap, mahusay na kalidad at magandang kulay, maaari rin itong magdagdag ng recycled na materyal at pagpuno upang mabawasan ang halaga ng mga produkto.
Sumusunod ang kumpanya ng Yanpeng sa pilosopiya ng negosyo na "customer first and forge ahead", sumusunod sa prinsipyo ng "customer first", at ibinabalik ang bawat customer na nagtitiwala sa amin ng Matipid na kagamitan at de-kalidad na serbisyo.

Prev: Zhejiang Yanpeng Nonwoven Machinery Co.,ltd na mga kaganapan sa eksibisyon noong Abril 2023

Susunod: How is SMS Nonwoven Fabric Produced By Nonwoven Machine and Its Application?

Mga maiinit na kategorya